The EFFI-TELE is a telecentric LED projector projecting collimated light. The collimated light is a parallel structure of light rays from a point source, the illuminated area and light intensity remain the same whatever the distance.
The EFFI-TELE can be used either in a homogeneous directed backlight configuration or associated with a coaxial system. It is available in a variety of colors and different sizes (20mm and 45mm) to match the application constrains.
It is perfectly suitable for the high precision measurements :
- Build your part number -
EFFI-TELE |
- | - | ||
optical diameter | Wavelengths (nm) |
Available Options | Refer to the detailed information below for any specific reference (with options, customized, ...). |
XXX : optical diameter (mm) | 20 | 45 |
---|---|---|
EFFI-TELE-20 | EFFI-TELE-45 |
Part number : EFFI-TELE-XXX...
Other optical diameters are available on request (ex: 70, 145mm,...) : contact us.
Color | ● UV | ● Blue | ● Green | ● Red | ●IR | ○ White (T°= 5500K ± 500K) |
---|---|---|---|---|---|---|
ZZZ : wavelength (nm) | 405 | 465 | 525 | 625 | 850 | 000 |
Part number : EFFI-TELE-XXX-ZZZ
Using the Polarizer accessory, it is possible to eliminate glare from the workpiece making it easier to acquire a suitable image for the application with no hot spot.
Part numbers: EFFI-TELE-XXX-ZZZ-POL
POL : polarizer accessory
If polarizer, add -POL in the part number
You can find the drawing and the weight of the products in the technical doc page.
On both versions, four M4x0.7 holes can be used to fix the product.
The installation of EFFI-Tele is easy thanks to Light mounting solutions.
Sealing | length | |
---|---|---|
EFFI-TELE-20 | 123mm | |
EFFI-TELE-45 | 144mm |
The EFFI-TELE are supplied directly with 24V DC via an M12 - 5 pins. Attention, the AIC pin must be connected.
EFFI-TELE is powered by a 24V DC source.
Using the AIC pin, the light intensity can be adjusted linearly:
• 0V – Full ON
• 5V-24V - OFF
Standard version: M12 connector - AIC (see previous part)
-STR expert version: M8 connector - direct control
Please refer to the datasheet for this specific mode of operation.
In expert mode, the LEDs are powered live, there is no protection. The maximum current defined in the documentation for a given frequency and pulse time cannot be exceeded.
Part numbers: EFFI-TELE-XXX-ZZZ-STR
A pulse controller can be used to power the EFFI-Lase version -STR. See pulse controller accessory EFFI-IPSC4.