• AutoStrobe or dimmable electronics of your choice
  • Greater than 90% homogeneity
  • Available in size 600mm
  • 500mm diameter inspection
  • Monochrome or tricolor
  • Adapted shape to lower distortion effect

- Build your part number -

EFFI-MDOME

- -
Size (Square headge) Wavelengths (nm)
Available Options Refer to the detailed information below for any specific reference (with options, customized, ...).

- Product Information -

- Available wavelengths -

> Monochromatic version

Color Blue Green Red IR white
(T°= 5500K ± 500K)
ZZZ : wavelength (nm) 465 525 625 850 000

Part number : EFFI-MDOME-600-ZZZ

> Tricolor

The MDOME is also available in a tricolor version.

- If RGB
Part number : EFFI-MDOME-600-RGB-ELS-125-24V

- So general tricolor
Part number : EFFI-MDOME-600-ZZZ-ZZZ-ZZZ-ELS-125-24V

logo infoPlease note, in the three-color version, the EFFI-MDOME is only available in the ELS-125 dimmable electronic version.

You can find the drawing and the weight of the products in the technical doc page.

- AutoStrobe version (Standard) -

> Connectivity

The EFFI-MDOME is supplied directly with 24V DC via an M12 - 5 pin connector. Note that the trigger pin must be connected either to the 24V DC signal for continuous mode, or to a PNP trigger signal for overdrive strobe mode.


Characteristics of the 5-pin M12 connector used to power the Effi-MDOME for machine vision and quality control
Pin number Designation Cable color
1 +24V Brown
2 N/A White
3 GND Blue
4 TRIGGER PNP Black
5 N/A Grey

> How the AutoStrobe works

Graphical representation of the output intensity curve of the Effi-Flex AutoStrobe driver overdrive
Effi-flex ELS Strobe lighting led bar high power direct or grazing or backlight for industrial vision and quality control

> Option: NPN connection

On request, Effilux can wire the pin 2 of the M12 connector for use in NPN [trigger on falling edge] for the AutoStrobe.
In this case, Lighting on if VNPN < 1.5V DC.

Part number : EFFI-MDOME-600-ZZZ-NPN

- Option : AIC version (ELS mode) -

The standard product (AutoStrobe) is not dimmable, EFFILUX offers an alternative electronic configuration suitable for continuous use and linescan applications. This version allows the intensity to be controlled according to the input signal (AIC): ELS Mode.

> Connection

The EFFI-MDOME is supplied directly with 24V DC via an M12 - 5 pins.

Characteristics of the 5-pin M12 connector used to power the Effi-MDOME for machine vision and quality control
Pin number Designation Cable color
1 +24V Brown
2 N/A White
3 GND Blue
4 AIC Black
5 N/A Grey

> AIC control


Graphical representation of the output intensity curve of the EFFI-MDOME AutoStrobe driver overdrive
Effi-MDOME ELS Strobe lighting led bar high power direct or grazing or backlight for industrial vision and quality control

Control of the output intensity according to the input AIC signal

EFFI-MDOME ELS Strobe lighting led bar high power direct or grazing or backlight for industrial vision and quality control

Part number : EFFI-MDOME-600-ZZZ-ELS-VVV-UUU
VVV : output current (100%), default 350.

logo info More powerful versions are also available, requiring special cooling, contact Effilux for more information.

UUU : DIM control range (5V, 10V or 24V)
Version ELS-IN: Inverse version (max of intensity to DIM = 0V)

- Option: POWER Version -



Standard Version


POWER Version ("PWR")


logo infoIf POWER Version, add -PWR at the end of the part number.
Use with a duty cycle ‹ 30% mandatory.

Part number: EFFI-MDOME-600-ZZZ-PWR

- Mechanical accessories -

- Electronic accessories -

- Application -

MDOME application
Vision of an illuminated camera without EFFI-MDOME Vision of a camera illuminated by an EFFI-MDOME

- Similar products -

EFFI-SDOME Small LED Dome Lights.

EFFI-FD Flat LED Dome Lights.